INDUSTRIAL
                                           RUST REMOVER TREATMENT

     “Rust” on the metal surfaces are very difficult to avoid. The industrial sector have lost a lot of  maintenance cost in order to deal with rust.
     Nowadays in order to remove rust out from the metal surfaces still troublesome for the industrial people , high cost, time consuming and toxic to human body and environment.
     The most popular ways to handle rust are replace the new parts, sand paper, sand blasting, concentrate acid or concentrate base which each of method have some limitation or trouble to the users.

             

     XCELPLUS NON-TOXIC RUST REMOVER is a non-hazardous rust remover that employs a unique selective agent to remove rust (iron oxide) without posing any health or environmental hazards.

Performance
1.Rapidly removes rust from ferrousmetal and stainless steel.
2.Non-corrosive, non-flammable,non-  toxic
3. Biodegradable
4. Contains no solvents, acids, bases or hazardous ingredients
5. Works at room temperature, requires no special equipment
6. Easy and safe to use
7. Safe on soft metals, plastic, rubber, PVC and other surfaces
9. Inhibits rust from reforming for up to 4 weeks

     Xcelplus (NTRR) works at a pH of 6.1 to 7 (neutral) through selective chelation. This is a process in which a large synthetic molecule forms a bond with metals and holds them in solution. Most chelating agents bind many different metals. The active ingredient in Xcelplus (NTRR) bonds to iron exclusively. It can remove iron from iron oxide, but is too weak to remove iron from steel because the iron is held much more strongly.

 

HOW TO USE XCELPLUS NON-TOXIC RUST REMOVER

     XCELPLUS (NTRR) is easy to use. Fully immerse the rusted item in XCELPLUS (NTRR) and check progress in about 30 minutes; no scrubbing necessary. Soak times will vary from 30 minutes to 24 hours depending on severity of rust, type of steel, and temperature. XCELPLUS (NTRR) is water based, therefore the active molecules will slow down as temperature decreases and increase as temperature increases. We recommend utilizing XCELPLUS (NTRR) at a bath temperature above 60° F.

     Once rust is removed, rinse item with water.  You can now paint, plate, or apply a long term Corrosion Preventative Compound

 

---